Setting Clock Semi-Automatically; Semi-Auto Clock Set - JVC HM-DB1U Instructions Manual

Setting clock semi-automatically

— Semi-auto Clock Set

You can change the host channel/D.S.T. /time zone
setting manually.
First follow steps 1 to 3 on page 10, then go to the
following steps.
4
Set Auto Clock to ON
Press [OK] or [#] to
move the highlight bar to
"AUTO CLOCK", then
press [%fi] so that "ON"
is selected.
Then;
To select the host channel — go to step 5.
To select the D.S.T. mode — go to step 6.
To select the time zone — go to step 7.
NOTE:
The time set previously will be erased when "AUTO
CLOCK", "HOST CH", "D.S.T." or "TIME ZONE" setting
is changed.
5
Select host channel
You can either select
"AUTO" or enter a PBS
channel number.
Press [OK] or [#] to
move the highlight bar
to "HOST CH", then
press [%fi] until
"AUTO" or the desired PBS channel number is
selected.
NOTE:
Some PBS channels do not transmit clock setting data.
* Auto Daylight Saving Time
This function enables automatic adjustment of the VCR's
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is
adjusted to 3:00 AM.
. . . on the last Sunday of October at 2:00 AM, the clock is
adjusted to 1:00 AM.
6
CLOCK SET
TIME DATE YEAR
--:--AM 1/ 1 04
AUTO CLOCK:ON
HOST CH :AUTO (CATV)
D.S.T. :AUTO
TIME ZONE :AUTO
PRESS( , ), THEN (OK)
7
PRESS(MENU) TO END
CLOCK SET
TIME DATE YEAR
--:--AM 1/ 1 04
AUTO CLOCK:ON
HOST CH :AUTO (CATV)
D.S.T. :AUTO
TIME ZONE :AUTO
PRESS( , ), THEN (OK)
PRESS(MENU) TO END
8
Select D.S.T. mode
You have three choices:
"AUTO"– Select if you want to adjust your VCR's
clock automatically by the incoming
signal from the host channel. (Auto
Daylight Saving Time*)
"ON"– Adjustment will be made by the built-
in clock itself.
"OFF"– Select when Daylight Saving Time does
not apply to you.
Press [OK] or [#] to move the arrow to "D.S.T.",
then press [%fi] repeatedly until the desired
setting is selected.
Select time zone
You can select the time zone automatically or
manually.
Press [OK] or [#] to move the arrow to "TIME
ZONE", press [%fi] repeatedly until "AUTO" or
the desired time zone is selected.
Each time you press the button, the time zone
changes as follows:
O "AUTO" O "ATLANTIC" O "EASTERN"
O "CENTRAL" O "MOUNTAIN" O "PACIFIC"
O "ALASKA" O "HAWAII" O (back to the
beginning)
NOTE:
If an incorrect clock time is displayed by the Plug &
Play setting, you may be receiving the clock setting data
of a PBS channel from an adjacent time zone or from
an incorrect PBS channel from a cable TV system. If you
selected "AUTO" for the host channel in step
sure to select the correct time zone manually.
Return to normal screen
Press [MENU].
IMPORTANT
Turn off the VCR after performing Semi-auto Clock Set.
[Auto] will appear on the front display panel while the
clock is being set. The current clock time will appear
automatically when the clock setting is complete.
11
EN
5
, be