Table of Contents
Advertisement
Basic
Recording
Features
● Turn on the VCR and the TV, and select the AV
mode on the TV.
● Set the [VCR/TV/CABLE/DBS] selector on the
Remote to [VCR].
IN F-1
VCR
CABLE
TV
/DBS
1
2
4
5
7
8
0
B
+
B
3
6
9
B
A
Changing display information
A
Press [DISPLAY] during recording or recording pause.
Each time you press the button, the front display panel
shows the channel number, clock time, and the
recording speed in sequence.
Channel No.
Recording Speed
● To display the VCR status including the time counter,
channel number, tape remaining time and the clock
time on the TV screen, see 'Showing on-screen display'
(
pg. 26).
Specifying recording length
B
— Instant Timer Recording (ITR)
You can easily specify the recording length from 30
minutes to 8 hours and the VCR shuts off after recording
is finished.
During recording, press [REC ( ¶ )] on the front panel
repeatedly until the recording length you want appears
on the front display panel.
The record [Q] indicator starts flashing.
Each time you press the button, recording length
increases in 30-minute intervals (up to 8 hours).
To cancel an ITR, press [STOP (7 )] on the Remote or
[STOP/EJECT ( 7 / 0 )] on the front panel.
Watching one program while
C
recording another
1
Engage TV mode
During recording...
● Change the TV's input mode from AV to TV.
2
Select channel for viewing
Select the channel you want to watch, on the TV.
25
EN
Clock Time
Advertisement
Table of Contents
