Serial Plate Location; Casters And Leg Levelers - Hussmann Excel Installation & Service Manual

I
1-4
NSTALLATION

SERIAL PLATE LOCATION

Direct a flashlight through the return air grille
to locate the serial plate. B
WIDE ISLAND MERCHANDISER FRONTS PROPERLY
The front of self-contained merchandiser is
readily identified by the location of the serial
plate affixed to the inside of the left front
assembly.
Serial Plate
Location
`

CASTERS AND LEG LEVELERS

The merchandiser may be equipped with
optional casters and optional leg levelers. If
the merchandiser has optional casters as
shown below, use the brake to lock the
merchandiser in place.
To
Unlock
P/N 0518279_A
E SURE TO POSITION
.
To
Lock
U.S. & Canada 1-800-922-1919 • Mexico 1-800-522-1900 • www.hussmann.com
If the merchandiser has standard leg levelers,
use an 18 mm open end wrench to screw down
the levelers at each front corner so that the
front is also level from end-to-end. At this
point, check to see if the merchandiser is level
front-to-rear. If it is not, turn each front corner
leveler up or down the same amount of turns
until the merchandiser is level front-to-rear.
Level on
Hand Rail
Adjustable
Leg Leveler
Raise
Lower