P/N 0518279_A
INSTALL RETURN AIR GRILLES
Remove the return air grilles that are packed
inside of the merchandiser, and install them in
the fitted slots below the display racks as
shown below.
SPLASHGUARDS AND PANELS
Ensure the merchandiser has been leveled and
all electrical and refrigeration work is complete
before installing splashguards and panels. Refer
to Section 2 for electrical and refrigeration
information.
See page 1-7 for an exploded view of how
brackets, panels and splashguards fit onto the
merchandiser.
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Install Splashguard Brackets
Position splashguard brackets first. Remove
the splashguard brackets from the plastic bag
shipped with the merchandiser. Position the
brackets on the merchandiser level to the floor.
1
Each bracket has a 1
rear of the bracket where it attaches to the
merchandiser. Tighten screws to secure the
brackets.
NOTE: The longer brackets are used at the
front of the merchandiser. The shorter brackets
are used at the sides of the merchandiser.
Bracket
Self-Contained Merchandisers
/
in. (38 mm) slot at the
2
Base of Case
1-5