Video - Planet ICA-3280 User Manual

8.4 Video

In the main interface, click "Configuration → Video" to enter the video and audio
configuration interface, where you can set the device video, audio and other functions.
8.4.1 Video
In the main interface click "configuration → video → video" into the video configuration
interface, where you can set the IP Camera device name, stream type, encoding and
other video parameters, as shown in Figure 8-21:
Figure 8-21
【Stream Type】Here Single/Third available.
【Profile】Default is the Main Profile; you can select Baseline Profile or High Profile.
【Video Encoding】Switch the encoding method in the drop-down menu.
【Resolution】Switch the output resolution in the drop-down menu.
【Framerate】Set the frame rate of the current output video of the device.
【Bit Rate】Supports 64-12000kbps. The higher the bit rate goes, the better the video
quality will be, but it occupies the greater network bandwidth and the greater the pressure
transmission.
【Rate Control】 Switch the code rate output mode in the drop-down menu -- fixed rate
and variable rate.
【I-Frame Interval】IP Camera acquisition key frame interval, can be set 1-5s.