check the card information, Total Capacity = Residual Capacity, formatted successfully.
○
2
R ec Setup
E
A
In the main interface, click "Configuration → System → SDCard → Rec Setup" to enter
the recording setting interface, here you can open the SD card video, set the SD card
recording schedule and stream type, as shown in Figure 8-11:
8.3 Network
In the main interface, click "Configuration →Network" to enter the network settings
interface, the network is divided into Basic Setup and Advanced Setup configuration.
8.3.1 Basic Setup
○
1
TCP/IP
E
A
In the main interface, click "Configuration → Network → Basic Setup → TCP / IP" to
enter the TCP / IP interface. Here you can set the IP address, subnet mask, gateway, and
DNS of the device as shown in Figure 8-12 below.
Figure 8-11