Advance Setup - Planet ICA-3280 User Manual

【BITVISION Port】When the BitVision App is directly connected to the device, the
"Private port" is entered into the BITVISION port.
【ONVIF Port】When the IP Camera accesses ONVIF agreement with the back-end
equipment, the ONVIF protocol needs to be enabled.
Please do not arbitrarily modify the port parameters; when there is a port
conflict, you need to modify the port number as follows:

HTTP and HTTPS port: Use the browser login to add the address after the
port number. You need enter the HTTP port number (for example, 8555)
that you want to change via the browser login.http://192.168.1.168:8555.

Make sure RTSP port (real-time transmission protocol port) is available for
modification.
8.3.2 Advanced Setup
In the main interface click on the "configuration →Network → Advanced Setup" to enter
the advanced configuration interface, where you can set the device DDNS, FTP, SMTP,
platform access, cloud storage and other functions.
① DDNS
In the main interface, click "Configuration →Network → Advanced Setup → DDNS" to
enter the DDNS function settings interface, where you can open the IP Camera DDNS
function. Select the DDNS type and enter the site name, corresponding to DDNS type
user name and password, and click "Save", as shown in Figure 8-14:
【DDNS】Enable / disable DDNS function.
【DDNS Type】Choose PLANET DDNS or PLANET Easy DDNS.
【Site Name】The input selection type must correspond to the successful domain name.
Figure 8-14