Chapter2. Ivs-110 - 1-Channel Internet Video Server; Package Content; Physical Installation - Planet IVS-110 Quick Start Manual

Chapter2. IVS-110 – 1-Channel Internet Video Server

2.1 Package Content

IVS-110 x 1
Power Adapter x 1
Power Cable x 1
CD Disk x 1
Quick Installation Guide x 1
Software CD x 1

2.2 Physical Installation

Front Panel
LAN Socket
The LAN socket is a RJ-45 connector for connections to 10Base-T Ethernet or 100Base-TX Fast
Ethernet cabling. This Ethernet port built N-Way protocol can detect or negotiate the transmission
speed of the network automatically. Please use Category 5 "straight through" cable to connect the IVS-
110 to a 100Mbps Fast Ethernet network switch or hub. The LAN socket is compliant with IEEE802.3af
standard PoE interface. NOTE: If you need to connect the IVS-110 to PC or notebook directly, you
should use cross over cable instead.
Video-in Jack
You can install an analog camera and connect it to video-in jack.
12V DC-Out Jack
The output power is 12V DC. This is used to supply 12V DC power to one external camera. The output
power is 12V DC, 400mA maximum. The output power still supplies 12 V DC, 400mA power to one
external, when the IVS-110 obtains power from PoE switch.
DI/DO/RS-485 Connector
This IVS-110 provides a general I/O terminal block with one digital input and one output for device
control. It has 6 Pins that from left to right that are 12V DC power supply (50mA maximum), Alarm Input,
GND, Alarm Output, D+ terminal of RS-485 and D- terminal of RS-485.