【OSD Text】Enter the preview interface to display text information, such as hall elevator,
hall door and other equipment location information.
【Mirroring】The default is OFF. You can switch to VERTICAL, HORIZONTAL, or BOTH,
when the device video image is reversed, through the menu to flip the image.
【Corridor Pattern】The default is off. In the corridor mode, you can choose to preview
the interface rotated 90 degrees and 270 degrees.
8.6 Events
In the main interface, click "Configuration → Events" to enter the event configuration
interface, including common events and smart events.
8.6.1 Ordinary Event
In the Ordinary event interface, you can set the device's motion detection, privacy mask,
video tampering, alarm input, exception and other events.
○
1
Motion Detection
E
A
The motion detection function is used to detect whether there is a moving object in a
certain area within a certain period of time. When there is a moving object, the IP camera
will alarm according to the setting.
In the main interface click on the "Configuration → Events → Motion Detection" to enter
the motion detection settings interface, where you can set the motion detection alarm area,
arming time, linkage mode and other related parameters, as shown in Figure 8-34.