Advertisement
Installation Instructions for Ford Transit
Step 1
Bolt bottom bracket to main assembly through the rear holes as
shown. Use two 1/4" x 7/8" hex bolt, two 1/4" lock washers and two
1/4" flat washers.
*SNUG TIGHTEN
Step 3
Place main assembly with mounting brackets into van. Put in between seats snug against the passenger
side. Be sure to have the rear support bracket past the rear of the rib in the floor.
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Step 2
Bolt the front bracket to
the front of the main assembly
using two 1/4" x 7/8" hex bolt,
four 1/4" flat washers and two
1/4" nyloc nuts.
*SNUG TIGHTEN
** We recommend having bracket all the way towards the bottom of
the slots.
Step 4
Install Instructions
Mark the slots in the rear bracket onto the
mat or floor.
On the side of the seat pedestal, mark the
slot in the front bracket.
Remove assembly with brackets
Page 7
Advertisement
