Removal - SRAM Quarq ShocWiz User Manual

Removal

ShockWiz™ should be removed from the suspension
when air spring and damping adjustments are
complete and you are satisfied with the fork and rear
SHOCK TUNING SCORE and suspension performance.
Unthread the ShockWiz hose connector from the
suspension fork or shock air inflation valve.
The ShockWiz hose connector must be removed from
the fork or shock first to avoid fork air pressure loss.
Install the fork or rear shock air inflation valve cap.
Cut the cable ties and remove ShockWiz from the fork
or rear shock.
Install the ShockWiz air inflation valve caps onto the
ShockWiz air inflation valves and store ShockWiz in a
safe location.
NOTICE
Do not leave ShockWiz attached to the suspension
during normal riding. ShockWiz is intended to be used
to analyze suspension performance and to suggest
adjustments that will improve performance.
64
64