Example circuits
A.3 Special applications
A.3.2
Controlling a motor with a magnetic parking brake
Requirements
ON / RUN relay output was parameterized to RUN.
Automatic restart.
Can cause death or serious injury.
If a starting command is pending, a restart will be triggered automatically after the reset.
This particularly applies if the motor protection has tripped. Dangerous states of the system
can result.
Reset the start command (e.g. via the PLC or switch) before performing a reset.
To do this, for example, link the group error output (terminals 95 and 96) into the control.
Wiring
F1
S1
S2
Q1
Q11
P1
M1
218
WARNING
Fuse
Switch
Pushbutton: Reset > 4 s
Motor starter protector
3RW50 soft starter
Indicator light, fault
Motor
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001