Setting Reset Mode And Soft Torque - Siemens SIRIUS 3RW50 Manual

Parameter assignment

5.5 Setting RESET MODE and Soft Torque

5.5 Setting RESET MODE and Soft Torque
RESET MODE and Soft Torque
With the MODE key you set the functions RESET MODE and Soft Torque at the same time.
Procedure
Automatic restart.
Can cause death or serious injury.
If a starting command is pending, a restart will be triggered automatically after the reset.
This particularly applies if the motor protection has tripped. Dangerous states of the system
can result.
Reset the start command (e.g. via the PLC or switch) before performing a reset.
To do this, for example, link the group error output (terminals 95 and 96) into the control.
96
WARNING
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001