Siemens SIRIUS 3RW50 Manual page 97

RESET MODE
Note that the setting of the RESET MODE (Page 98) only has an effect on the
acknowledgment response of the motor overload protection.
You will find more information in Chapter Faults and remedial actions of the
3RW50 soft starter (Page 168) with the comment "Depends on parameter RESET MODE".
Note
ATEX / IECEx applications
Note that the "Auto RESET" setting is not permissible when operating motors in hazardous
areas.
Soft torque
For more information, see Chapter Soft torque (Page 130).
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
RESET MODE LED
Off
Flashes green
Lights up green
SOFT TORQUE LED
Off
Lights up green
Parameter assignment
5.5 Setting RESET MODE and Soft Torque
Set RESET MODE
Manual RESET
Remote RESET
Auto RESET
Set soft torque
Off
On
97