Siemens SIRIUS 3RW50 Manual page 67

Procedure
Illustration similar
1. Insert the push-in lugs into each side of the enclosure until you hear them engage.
2. Position the 3RW5 communication module on the level surface over the drill-holes and
insert the head screws.
3. Attach the 3RW5 communication module on the bottom and top side of the level surface
using the head screws.
Result
You have mounted the 3RW5 communication module on a level surface. You can connect
the COM connecting cable to the 3RW50 soft starter (Page 85) and on the
3RW5 communication module (Page 86) and connect the 3RW50 soft starter to the fieldbus
via the 3RW5 communication module.
You can find further information on connecting to the fieldbus in the Equipment Manual for
the respective 3RW5 communication module.
SIRIUS 3RW50 soft starter
Manual, 09/2019, A5E35628455002A/RS-AA/001
Mounting and dismantling
3.5 3RW5 communication module
67