HP ENVY x360 13 Maintenance And Service Manual page 50

8. Remove the four Phillips M2.5×5.3 screws that secure the display assembly to the keyboard/top cover.
9. Swing the front edge of the keyboard/top cover (1) up and away from the display assembly.
(The keyboard/top cover disengages from the display assembly hinges.)
10. Separate the keyboard/top cover (2) from the display assembly.
11. If it is necessary to replace the display panel assembly or any of the internal display components, follow
these steps:
CAUTION:
Use caution when removing the display panel assembly.
CAUTION:
all foreign objects, screws, and tools. Failuire to follow this caution can result in damage to the display
panel surface.
42 Chapter 5 Removal and replacement procedures
The display panel assembly is extremely fragile. Using excessive force can damage the panel.
Before positioning the display panel assembly face down, make sure the work surface is free of