HP ENVY x360 13 Maintenance And Service Manual page 44

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
Remove the solid-state drive:
1. Disconnect the battery cable from the system board.
2. Release the cover (1) that secures the solid-state drive shield to the system board.
3. Remove the tape (2) that secures the solid-state drive to the keyboard/top cover.
36 Chapter 5 Removal and replacement procedures
Bottom cover on page 30).