ZKTeco PA22 User Manual
  1. Manuals
  2. Brands
  3. ZKTeco Manuals
  4. Intercom System
  5. PA22
  6. User manual
ZKTeco PA22 User Manual

ZKTeco PA22 User Manual

Hide thumbs Also See for PA22:
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
PA22
Date: February 2023
Doc Version: 1.0
English
Thank you for choosing our product. Please read the instructions carefully
before operation. Follow these instructions to ensure that the product is
functioning properly. The images shown in this manual are for illustrative
purposes only.
P a g e
| 1
For further details, please visit our Company's website
www.zkteco.com.
Copyright©2023 ZKTECO CO., LTD. All rights reserved

Advertisement

Table of Contents
loading

Related Manuals for ZKTeco PA22

Summary of Contents for ZKTeco PA22

  • Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved...
  • Page 2 Copyright © 2023 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
  • Page 3 PA22 User Manual ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or exemplary damages, including, without limitation, loss of business, loss of profits, business interruption, loss of business information or any pecuniary loss, arising out of, in connection with, or relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages.
  • Page 4 User Manual About the Company ZKTeco is one of the world’s largest manufacturers of RFID and Biometric (Fingerprint, Facial, and Finger- vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
  • Page 5 The general information which helps in performing the operations faster. The information which is significant. Care taken to avoid danger or mistakes. The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved...

  • Page 6: Table Of Contents

    6. System Settings ..........................29 6.1. Date and Time ..............................29 6.2. Access Logs Setting ............................30 6.3. Palm Parameters ..............................30 6.4. Factory Reset ............................... 31 6.5. USB Upgrade ............................... 31 P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 7 16.2. Add Device on the Software .......................... 55 16.3. Add Personnel on the Software ........................57 Appendix1 Wiegand Introduction ......................58 Privacy Policy ............................59 Eco-friendly Operation ........................... 61 P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 8: Instruction For Use

    Compare the palm image collected by the palm collector with all the palm data in the device. Place the palm in the area that can be collected by the palm collector, and the device will automatically detect the palm verification mode. P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 9 Place the palm in the area that can be collected by the palm collector. After successful verification, the prompt box "Successfully verified." will appear. P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 10: Card Verification

    Place the card in the card induction area to verify (the card must be registered first). The following screen displays as successful and failed verification respectively. On successful verification On failed verification P a g e Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 11 Place the card in the card induction area to verify. The following screen displays as successful and failed verification respectively. On successful verification On failed verification P a g e | 10 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 12: Password Verification

    Select the Password icon to enter password verification mode. Enter the password and click [M/OK]. The following screen displays as successful and failed verification respectively. On successful verification On failed verification P a g e | 11 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 13: Combined Verification

    When the device is turned on, the initial interface is shown as below: Alarm Signal WI-FI Connection Signal Date & Time ADMS Connection Signal Clock Network Connection Signal Attendance Status P a g e | 12 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 14: Main Menu

    To automatically test whether each module functions properly, including Autotest the screen, audio, camera, and real-time clock. To view the data capacity, device, firmware information, and privacy policy System Info of the current device. P a g e | 13 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 15: User Management

    The administrator owns all management privileges. If a custom role is set, you can also select custom role permissions for the user. Select User Role to set Normal User or Super Admin. P a g e | 14 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 16 The card registration will be successful. If the card is registered already then, the "Duplicate Card" message shows up. The registration interface is as follows: P a g e | 15 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 17 New users belong to Group 1 by default and can be reassigned to other groups. The device supports up to 99 access control groups. Select Time Period, select the time period to use. P a g e | 16 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 18: Search User

    Delete Card Number Only: Deletes the card number information of the selected user. Delete Palm Only: Deletes the Palm information of the selected user. Note: If you select Delete User, all information of the user will be deleted. P a g e | 17 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 19: Edit User

    Select Display Style on the User Mgt. interface. Choose the style of the All Users interface’s list. Different display styles are shown as below: Multiple Line Multiple Line Mixed Line P a g e | 18 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 20: User Role

    Note: You need to select the features in the sub-menus. If the device has a role enabled, you may assign the roles you set to users by selecting User Mgt. > New User > User Role. P a g e | 19 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 21 PA22 User Manual If no super administrator is registered, the device will prompt "Please enroll super admin first." after selecting the enable bar. P a g e | 20 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 22: Communication Settings

    Dynamic Host Configuration Protocol helps in dynamically allocating IP DHCP addresses for clients via server. Display in Status Bar To set whether to display the network icon on the status bar. P a g e | 21 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 23: Serial Comm

    The connection password needs to be entered before the device can be connected to the PC software if a Comm Key is set. Select PC Connection on the Comm. Settings interface to set Comm Key. P a g e | 22 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 24: Wireless Network

    Wi-Fi Enabled: Choose the required network from the searched network list.  Click the password field to enter the password, and then select Connect to Wi-Fi (OK) and press  P a g e | 23 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 25 The default Subnet Mask of the Wi-Fi network is 255.255.255.0. It can be modified Subnet Mask according to network availability. The default Gateway address is 0.0.0.0. It can be modified according to network Gateway availability. P a g e | 24 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 26: Cloud Server Setting

    It is used to set the Wiegand input and output parameters. Select Wiegand Setup on the Comm. Settings interface to set the Wiegand input and output parameters. P a g e | 25 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 27: Wiegand Input

    35 bits. The 2 bits are the device codes. The 18 to 33 bits are the card numbers, and the to 35 bits are the manufacturer codes. P a g e | 26 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 28: Wiegand Output

    It is similar to the device ID. The difference is that a site code can be set Site Code manually and is repeatable on a different device. The valid value ranges from 0 to 256 by default. P a g e | 27 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 29: Network Diagnosis

    Select Network Diagnosis on the Comm. settings interface. Enter the IP address that needs to be diagnosed and click Start the Diagnostic Test to check whether the network can connect to the device. P a g e | 28 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 30: System Settings

    For example, the user sets the time of the device (18:35 on March 15, 2020) to 18:30 on January 1, 2021. After restoring the factory settings, the time of the device will remain 18:30 on January 1, 2021. P a g e | 29 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 31: Access Logs Setting

    Descriptions Palm 1:1 Matching Only when the similarity between the verifying palm and the user’s registered Threshold palm is greater than this value can the verification succeed. P a g e | 30 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 32: Factory Reset

    Select the USB Upgrade option on the System interface. Note: If an upgrade file is needed, please contact our technical support. Deny firmware upgrade under normal circumstances. P a g e | 31 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 33: Security Setting

    Set whether to display the username in the verification result interface. Name Display Verification Set whether to display the verification mode in the verification result Mode interface. P a g e | 32 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 34: Personalize Settings

    It is the time interval in switching between different slide show pictures. The Slide Show Interval function can be disabled, or you may set the interval between 3 and 999 seconds. P a g e | 33 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 35: Voice Settings

    Many companies choose to use the bell to signify on-duty and off-duty time. When reaching the scheduled time for the bell, the device plays the selected ringtone automatically until the ringing duration passes. Select the Bell Schedules option on the Personalize interface. P a g e | 34 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 36 The editing method is the same as the operations of adding a new bell schedule. Delete a Bell: On the All Bell Schedules interface, select the required bell schedule, select Delete, and then select [Yes] to delete the selected bell. P a g e | 35 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 37: Data Management

    When deleting the access records, you need to select Delete All or Delete by Time Range. Select Delete by Time Range, and you need to set a specific time range to delete all data with the period. P a g e | 36 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 38: Backup Date

    Press ▼ and [M/OK] to select the local configuration items to be back up to the device the selected items. Press ▼ to select Backup Notes, enter some textual information, and press [M/OK]. P a g e | 37 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 39: Restore Date

    Press ▼ to select Restore from Device and press [M/OK]. Press ▼ and [M/OK] to select the local configuration items to be restored and save the selected items. P a g e | 38 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 40 Note: Before you restore data from a USB drive, insert the USB drive into the USB interface of the device. Restore from USB Disk, the operations are similar to those performed to Restore from Device. P a g e | 39 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 41: Access Control

    Door sensor type options. Door Lock The length of time that the device controls the electric lock to be in unlock state. Delay (s) Valid value: 1 to 99 seconds. P a g e | 40 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 42: Time Schedule

    "OR". Thus, when the verification time falls in any one of these time-periods, the verification is valid. The Time Zone format of each time-period is HH MM-HH MM, which is accurate to minutes according  P a g e | 41 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 43: Holidays

    Select Holidays on the Access Control interface to set the Holiday access. P a g e | 42 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 44: Combined Verification

    N may all belong to one access group or may belong to five different access groups. Select Combined Verification on the Access Control interface to configure the combined verification setting. P a g e | 43 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 45: Anti-Passback Setup

    Wiegand format and Output type (User ID / Card Number) adopted by the master device and slave device must be consistent. Slave Device Master Device Door User P a g e | 44 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 46: Duress Options Settings

    At the same time, a signal is sent to trigger the alarm as well. Select Duress Options on the Access Control interface to configure the duress settings. P a g e | 45 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 47 1 to 999 seconds. Set the 6-digit duress password. When the user enters this duress password Duress Password for verification, an alarm signal will be generated. P a g e | 46 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 48: Usb Manager

    Import all the attendance data from the device to a USB disk. Import all the user information, fingerprints, and facial images from the device User Data to a USB disk. P a g e | 47 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 49: Usb Upload

    [Upload selected picture] or [Upload all pictures]. The images display as wallpaper after upload. User Data Upload the message stored in a USB disk to the terminal. P a g e | 48 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 50: Attendance Search

    Select the time range for the records you want to search. The record search succeeds. Select the record in green to view its details. The below figure shows the details of the selected record. P a g e | 49 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 51: Autotest

    To test the RTC. The device checks whether the clock works normally and accurately Test Clock with a stopwatch. Touch the screen to start counting and press it again to stop counting. P a g e | 50 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 52: System Information

    Displays the firmware version and other version information of the device. For personal privacy policy, please refer to Appendix 2 Privacy Policy (This Privacy Policy menu is displayed after enabled the Security Setting function). P a g e | 51 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 53: Troubleshooting

    Only when [Speaker Alarm] (Access Control > Access Control Options > Speaker Alarm) is [ON] will the speaker raise an alarm. P a g e | 52 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 54: Connect To Zkbio Access Ivs Software

    Click Access Control > Device > Search Device, to open the Search interface in the software. Click Search, and it will prompt “Searching……”. After searching, the list and total number of access controllers will be displayed. P a g e | 53 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 55: Add Personnel On The Software

    Fill in all the required fields and click [OK] to register a new user. Click Access > Device > Device Control > Synchronize All Data to Devices to synchronize all the data to the device including the new users. P a g e | 54 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 56: Connection To Zkbiosecurity Software

    Click Access Control > Device > Search Device to open the Search interface. Click Search, and it will prompt Searching……. After searching, the list and the total number of access controllers will be displayed. P a g e | 55 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 57 PA22 User Manual Click Add to add the required device. P a g e | 56 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 58: Add Personnel On The Software

    Click Personnel > Person > New to add new personnel. After setting all the parameters, click OK. Note: For other specific operations, please refer ZKBioSecurity User Manual. P a g e | 57 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 59: Appendix1 Wiegand Introduction

    (the time between two pulses) allowed by the F series fingerprint access control terminals. Sign Definition Card Reader Typical Value Pulse Width 100 µs Pulse Interval 1 ms Table1: Pulse Time Figure1: Sequence Diagram P a g e | 58 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 60: Privacy Policy

    Privacy Policy Notice: To help you better use the products and services of ZKTeco and its affiliates, hereinafter referred as “we”, “our”, or “us”, the smart service provider, we consistently collect your personal information. Since we understand the importance of your personal information, we took your privacy sincerely and we have formulated this privacy policy to protect your personal information.
  • Page 61 To keep pace with the rapid development of technology, adjustment of business operations, and to cope with customer P a g e | 60 Copyright©2023 ZKTECO CO., LTD. All rights reserved.

  • Page 62: Eco-Friendly Operation

    The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements. P a g e | 61 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
  • Page 63 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone : +86 769 - 82109991 : +86 755 - 89602394 www.zkteco.com P a g e | 62 Copyright©2023 ZKTECO CO., LTD. All rights reserved Copyright © 2023 ZKTECO CO., LTD. All Rights Reserved.

Table of Contents