Grandhall Freedom 450 Operating And Assembly Instructions Manual page 4

4
ALWAYS CHECK FOR GAS LEAKS EACH TIME
YOU USE YOUR OUTDOOR RANGE BARBECUE
You should follow this procedure after any of the following:
• Not having used the appliance for an extended period of time,
• Initial assembly of appliance,
• Any disconnection and reconnection of hose assembly,
• Changing gas cylinder,
• Upon re-connecting gas cylinder after it has been disconnected for storage.
CHECKING FOR GAS LEAKS
NEVER CHECK FOR LEAKS WITH
A FLAME
1. Make liquid detergent solution by mixing one (1) part liquid
detergent and four (4) parts water.
4 parts water
1 part liquid
detergent
2. Turn burner control(s) to 'OFF', then turn on gas at source.
IF YOU HAVE A GAS LEAK YOU
CANNOT RECTIFY, TURN OFF THE GAS
AT THE SOURCE. CONTACT THE
MANUFACTURER OR PLACE OF
PURCHASE.
S A F
Open 1/4 - 1/2
E T Y
3. Apply the liquid detergent solution to all visible and accessible
gas connections, including the connection to the gas cylinder.
Bubbles will appear in the liquid detergent solution if
connections are not properly sealed. Tighten or rectify as
necessary.
WHEN CHANGING THE GAS HOSE FOR
ANY REASON, ALWAYS CHECK THE
CONNECTION TO THE MANIFOLD FOR
GAS LEAKS BEFORE OPERATING THE
APPLIANCE.
4