Download Print this page

Grandhall Freedom 450 Operating And Assembly Instructions Manual page 19

Portable gas barbecues
Hide thumbs Also See for Freedom 450:

Advertisement

19
DO NOT USE OVEN CLEANER TO CLEAN
THE OUTDOOR RANGE.
SOME PROPRIETORY BARBECUE
CLEANERS MAY AFFECT / DAMAGE
SOME OF THE SURFACE COATINGS
USED ON THIS APPLIANCE.
READ THE CLEANER INSTRUCTIONS
CAREFULLY.
IT IS RECOMMENDED TO TEST FIRST IN
AN INCONSPICUOUS PLACE.
GENERALLY WE RECOMMEND ONLY
WARM SOAPY WATER FOR CLEANING
THIS APPLIANCE.
FAILURE TO READ AND FOLLOW THE
'USE AND CARE INSTRUCTIONS' COULD
RESULT IN A FIRE OR EXPLOSION
THAT COULD CAUSE SERIOUS BODILY
INJURY, DEATH OR PROPERTY
DAMAGE.
IN COASTAL AREAS, FREQUENT
CLEANING AND THE USE OF A COVER
IS RECOMMENDED TO PROLONG THE
LIFE OF THE APPLIANCE.
SALTY AIR WILL ADVERSELY AFFECT
EXPOSED PARTS.
CLEANING AND MAINTENANCE
Proper care and maintenance will keep your Outdoor Range in top
operating condition and prolong its life. Follow these cleaning
procedures on a timely basis and your Outdoor Range will stay
clean and operate with minimum effort.
CAUTION: Be sure your Outdoor Range is off and
cool before cleaning.
CLEANING THE COOKING PLATE
Before initial use and periodically, wash the cooking plates in a mild
soap and warm water solution. You can use a wash cloth or
vegetable brush to clean the cooking plates.
It is recommended cooking plates be coated with a thin layer
of cooking oil on a regular basis to prevent rusting. Slight rusting
can be removed with a scrubbing brush before use.
M
A
I
N
T
E
N
A
N
C
CLEANING THE GREASE TRAY RECEPTACLE
To reduce the chance of fire, the grease receptacle should be
visually inspected before each appliance use.
grease and wash grease receptacle with a mild soap and warm
water solution.
NOTE: Grease fires are not covered by warranty.
CLEANING EXTERIOR SURFACES
Before initial use and periodically thereafter we suggest you wash
your Outdoor Range using a mild soap and warm water solution.
You can use a wash cloth or sponge for this process. Do not use
a stiff wire or brass brush. These will scratch stainless steel and
chip painted surfaces (varies by model) during the cleaning
process.
CARE FOR STAINLESS STEEL
Stainless steel over time will be affected by 'tea staining' (the
brown discolouration of some stainless steel).
Tea staining can be reduced by washing the surface with
mild detergent and warm water and then rinsing with clean cold
water. We recommend the surface be wiped dry with a clean cloth.
E
Remove any
19

Advertisement

loading