Assembling The Unit - Stihl BT 130 Instruction Manual

Check the condition of the muffler.
To reduce the risk of fire and damage to
hearing, do not operate your machine if
the muffler is damaged or missing.
Do not touch a hot muffler since burn
injury will result.
Vibration behavior is influenced by the
condition of the AV elements – check the
AV elements at regular intervals.
Maintenance, replacement, or repair of
the emission control devices and
systems may be performed by any
nonroad engine repair establishment or
individual. However, if you make a
warranty claim for a component which
has not been serviced or maintained
properly or if nonapproved replacement
parts were used, STIHL may deny
coverage.
For any maintenance please refer to the
maintenance chart and to the warranty
statement near the end of the instruction
manual.
BT 130

Assembling the Unit

Fitting activating lever for auger brake
3
1 2
3
Insert the activating lever (1) into
N
the clamp
Place the holder (2) onto the
N
activating lever
Screw in the fastening screws (3)
N
and tighten
Fit the padding
3
Hook the padding (1) with the
N
tabs (2) into the oblong holes in the
handle frame
Fold up the padding
N
Secure the padding to the
N
handlebar with the cling strips (3) –
do not jam the throttle cable
English
3
7