Engine Running Behavior; Lubricating The Gearbox - Stihl BT 130 Instruction Manual

WARNING
If the spark plug comes with a
detachable adapter nut (1), screw the
adapter onto the thread and tighten it
down firmly to reduce the risk of arcing
and fire.
Installing the spark plug
Screw the spark plug (3) into the
N
cylinder and fit the boot (2) (press it
down firmly).
BT 130

Engine Running Behavior

1
If engine running behavior is still
unsatisfactory after the air filter has been
serviced and the carburetor and throttle
cable have been adjusted correctly, the
cause may also be in the muffler.
Have the muffler checked for
contamination (coking) by a servicing
dealer!
STIHL recommends that maintenance
and repair work be carried out only by
authorized STIHL dealers.
2
3

Lubricating the Gearbox

Check the lubricant filling
N
periodically – approx. every
50 hours of operation
1
Remove the screw plug (1)
N
If no grease can be seen on the inside of
the screw plug:
Apply tube (2) of gear lubricant
N
Squeeze grease into the gear
N
housing – approx. 5 to 10 g
Do not completely fill the gear
N
housing with grease
Refit locking screw and tighten
N
securely
English
17