Advertisement
Installing a GPU Card in the GS608
Paste thermal compound
1.
Check that the GPU surface is clean. Use
a tissue to clean off any residual thermal
paste.
2.
Determine the area on the GPU card that
will be in contact with the heat sink, and
paste 0.4 ml of thermal compound on the
area.
3.
Use a clean blade or card to smear the
thermal compound over the entire center
of the GPU card. The thermal compound
layer is about 0.2 mm. Ensure that the
thermal compound is evenly and fully
painted.
Copyright © Huawei Technologies Co., Ltd. 2020
Pasting methods
Smeared thermal compound layer
Page 83
Advertisement
