Advertisement
Removing a CPU from the G560 V5
Removing a CPU
1. Determine the location of the CPU to be removed.
2. Use a T20 torx screwdriver to loosen the four middle screws (corresponding
to 2 on the heat sink label) on the heat sink. See (1) in the figure on the right.
Then loosen the two diagonal screws (corresponding to 1 on the heat sink
label). See (2) in figure on the right.
3. Lift the heat sink and place it upside down on the desk.
Copyright © Huawei Technologies Co., Ltd. 2020
Page 61
Advertisement
