Advertisement
Removing a CPU from the G560 V5
1.
Insert a flat-head screwdriver into the release slot of the CPU carrier and twist the
screwdriver to raise one edge of the carrier. See (3) in the figure on the left.
2.
Pinch the retain clip on the other edge. See (4) in the figure on the left. Lift the carrier with
the CPU inside upwards in the direction of the arrow. See (5) in the figure on the left.
3.
Bend the installation tool edge with a triangular hole to release the CPU from the
installation tool. See the figure on the right.
4.
Holding both sides of the CPU, lift it upwards. Place the removed CPU in an ESD bag.
Copyright © Huawei Technologies Co., Ltd. 2020
Page 62
Advertisement
