Advertisement
Installing a GPU Card in the GP308
Installing a GPU card
1. Determine the location and numbering of the GPU
card to be installed.
2. Align the GPU card with the slot, and insert the
GPU card into the slot. See (1) in the figure.
3. Loosen the two screws on the GPU card using a
Phillips screwdriver. See (1) in the figure.
4. Tighten the two screws using a Phillips screwdriver
to secure the GPU card. See (2) in the figure.
5. Connect the GPU card to the PCIe board using a
power cable. If multiple GPU cards are to be replaced,
connect the GPU cards to correct connectors
according to the mapping shown in the figure.
Copyright © Huawei Technologies Co., Ltd. 2020
Page 80
Advertisement
