Table of Contents
Advertisement
Caring For Your Air
Conditioner
In This Section
Pm
Paw
Cloming Iho air infako ~anol .......................... .20
Undaratulding
normd o~ualing
l uunda . ..2 3
clouling
tho air filter ...... . ................................ 21
swing nugy
................................................
23
Puformlng
l nnud mdnbnnca
.................... .21
Proper maintenance of your air conditioner will
help ensure longer lie and lower operating costs.
This section will tell you how to clean your air
conditioner and perform annual maintenance.
You can always call your authorized Whirlpool@
servicing dealer for an annual check-up.
Electrical Shock and Fire Hazard
l
Unplug power cord from receptacle before
cleaning unit. Failure to do so could result
in electrical shock or personal injury.
l
Do not use flammable fluids, solvents,
abrasive cleaners or strong detergents.
Fire or product damage could resuft.
Cleaning
the air intake
panel
1.
Unplug the power cord.
2. Remove the air intake panel from unit for
cleaning. Press down at top of panel to
release it from the front panel frame.
3. Tilt top of panel toward you.
4. Lii panel up and away from the bottom
spring clips.
5. Remove the air filter from the back side of
the air intake panel and clean it separately.
(See "Cleaning the air fiftef on page 21.)
6. Clean air intake panel with warm water, mild
soap or detergent and a soft cloth. Rinse
and dry thoroughly.
7. Wipe control panel clean wfth a soft, dry
cloth.
6. Replace air fifter.
9. Replace the air intake panel. Locate bottom
of panel on the spring clips. Press down on
top edge of panel and push it toward the
unit to secure the upper tabs.
10. Plug in the power cord.
Push down
end tilt
forwerd
Air i&ko
pnd
20
Advertisement
Table of Contents
