Operating Your Air Conditioner; Starting Your Air Conditioner - Whirlpool ACM102 Use And Care Manual

Operating Your Air Conditioner
To obtain the best possible results from your air conditioner, it is important that you operate it
properly. This section tells you how to set the controls and how to direct the cooled air.
Starting your air conditioner
Flre Hazard
Do not use an extension cord.
Doing so can result in death, flre, or
electrical shock.
1. Set the Fan Control
to the
desired setting.
LOW COOL
- for sleeping comfort
MEDIUM COOL
- for normal cooling
HIGH COOL
- for fastest cooling
FAN ONLY
- to circulate room air without
cooling it
2. Turn the Thermostat Control
to the
desired setting. You can adjust the air
conditioner's cooling performance by
turning the Thermostat Control clockwise
for more cooling or counterclockwise for
less cooling. You will need to experiment
to find the setting which suits you best.
IMPORTANT:
If you turn the air conditioner
off, or if the compressor turns off when you
lower the Thermostat Control, wait at least ,
3 minutes before turning the air conditioner
back on. If you don't wait, you may blow a
fuse or trip a circuit breaker.
Electrical Shock Hazard
Plug into a grounded 3-prong outlet.
Do not remove ground prong.
Failure to follow these Instructions
can result in death or electrlcal shock.
5