Operating Your Air Conditioner; Starting Your Air Conditioner - Whirlpool ACU124XD0 Use And Care Manual

Operating Your Air Conditioner
To obtain the best possible results from your air conditioner, it is important that you operate it
properly. This section tells you how to set the controls and how to direct the cooled air.
Starting your air conditioner
1. Set Exhaust Control
to CLOSED for
maximum cooling performance. (See
"Using the exhaust vent control" on
paw 6.1
2. Set the Fan Control
to the desired
setting. You can use either the ENERGY
SAVER or NORMAL FAN settings. (See
'Using the energy saver settings" on
paw 6.1
LOW -for
sleeping comfort
MED -
for normal cooling
QUICK COMFORT-for
fastest coding
FAN ONLY
-to circulate room air without
cooling it
Electrical Shock Hazard
l
Plug unit onfy into grounded electrical
outlet.
*Do not uw an extension cord.
l
Do not operate unit with the front panel
removed.
Failure to follow the above precautions
couki result in electrical shock or per-
sonal injury.
3. Turn the Thermostat Controi
to a mid
setting. You can adjust the air condi-
tioner's cooling performance by turning
the Thermostat Control clc&wise for
more cooling or counterclockwise for less
cooling. You will need to experiment to
find the setting which suits you best.
IMPORTANT:
lf you turn the air conditioner
off, or if the compressor tums off when you
lower the Thermostat Control, wait at feast
3 minutes before turning the air conditioner
back on. If you don't waft, you may blow a
fuse or trip a circuit breaker.
5