Operating Your Air Conditioner; Starting Your Air Conditioner - Whirlpool R511 Use & Care Manual

Operating Your Air Conditioner
Electrical Shock Hazard
Plug into a grounded three-prong outlet.
Do not remove ground prong.
Do not use an adapter.
Failure to follow these instructions can
result in death or electrical shock.
Starting your air conditioner
Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or
electrical shock.
1. Set Exhaust Control (on some models) to
CLOSED for maximum cooling results.
2. Set System Control to the desired setting
LO COOL (LO) . . .._._.. for sleeping comfort
MED COOL (MED) ..______ for normal cooling
HI COOL (HI) . . . . . . . . for maximum cooling
FAN ONLY* ,...__. for circulating room air when no
cooling is desired
*on some models
3. Turn the Thermostat Control to number
6 (mid-setting). You can adjust the air condi-
tioner's cooling performance by resetting the
Thermostat Control to a higher number for
maximum cooling. Lower the number setting
for less cooling. You will need to experiment
to find the setting which suits you best.
NOTE: If you turn your air conditioner off or if
the compressor turns off when lowering the
Thermostat Control, wait at least 3 minutes
before turning it back on or you may blow a
fuse or trip a circuit breaker.