Operating Your Air Conditioner; Starting Your Air Conditioner; Changing Air Direction - Whirlpool ACM052 Use & Care Manual

Operating Your Air Conditioner
Starting your air conditioner
Fan Spc ?ad
Control
-
Therma Istat
Tab
injury.
Electrical Shock Hazard
l
Plug unit only into grounded electrical
outlet.
l
Do not use an extension cord.
l
Do not operate unit with front removed.
Failure to follow the above precautions
could result in electrical shock or personal
1. Set Fan Speed Control to the desired setting.
LO COOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . for sleeping comfort
MED COOL . . . . . . . . . . . . . . . . . . .._........ for normal cooling
HI COOL . .._....... for maximum cooling
FAN ONLY . . . . . . . . . . . . . . . . . . . . . for circulating room air
when no cooling is desired
2. Set thermostat control to number 6 (mid-
setting). You can adjust the air conditioner's
cooling performance by resetting the thermostat
control to a higher number for more cooling. Set
thermostat control to a lower number for less
cooling. You will need to experiment to find the
setting which suits you best.
NOTE: If you turn your air conditioner off or if the
compressor turns off when lowering the thermostat
control, wait at least three (3) minutes before
turning it back on or you may blow a fuse or trip a
circuit breaker.
Changing air direction
The louvers, in the top grille area of the air
conditioner, control the direction of the cooled air.
Move the tab, at the top of the louvered area, in
the direction you want the air to go (right, left or
straight ahead).
3