Table of Contents
Advertisement
Operating Your Air Conditioner
Starting your air conditioner
Electrical
Shock Hazard
l
Plug unit only into grounded
electrical
outlet
l
Do not use an extension
cord.
l
Do not operate unit with front removed.
Failure to follow the above precautions
could resutt in electrical
shock or personal
injury
1. Set Exhaust
Vent Control to CLOSED for
maximum cooling.
2. Set Fan Speed Control to the desired setting.
ENERGY SAVER settings-the
fan stops
when the compressor stops. This saves
energy by not continuously
running the fan.
There are 3 fan speeds: HI for maximum
cooling, MED for normal cooling and LO for
sleeping comfort.
NORMAL settings-the
fan runs continu-
ously. There are 3 fan speeds: HI for maxi-
mum cooling, MED for normal cooling and LO
for sleeping comfort.
FAN ONLY setting4rculates
room air when
no cooling is desired.
3. Turn the Thermostat
Control
to a mid-
setting. You can adjust the air conditioner's
cooling performance
by turning the Thermo-
stat Control clockwise for more cooling. Turn
thermostat control counterclockwise
for less
cooling. You will need to experiment
to find the
setting which suits you best.
NOTE: If you turn your air conditioner off, wait at
least 3 minutes before turning it back on or you
may blow a fuse or trip a circuit breaker.
3
Advertisement
Table of Contents
