This installation manual explains how to install a Module control. Please read this manual
thoroughly before installing the product. (Please refer to an appropriate installation manual
for any optional product installation.)
Hazards or unsafe practices that may result in severe personal injury or death.
Hazards or unsafe practices that may result in minor personal injury or property damage.
Contact service center for installation.
y If not, there is risk of product malfunction, water leakage, electric shock or fire.
Install the product on a hard and even place that can support its weight.
y If the place cannot support its weight, the product may fall down and it may cause
Connect the power with rated voltage when installing.
y If not, there is risk of fire or damage to the product.
Check if the installation was done correctly according to the installation manual.
y There is risk of electric shock or fire if the product is installed incorrectly.
Make sure that all wiring work is done by qualified person complying regional
standards and instructions in this manual.
y If the installation is done by unqualified person, there is risk of product malfunction,
electric shock or fire caused by incorrect installation.
Do not attempt to move or re-install the product that is already installed.
y There is risk of electric shock or fire.
Do not attempt to repair, disassemble, or modify the product yourself.
y There is risk of product damage, electric shock or fire. When repair is needed,
consult service center.
Contact the service center when you need to dispose the product.
SOL MODULE CONTROLLER_IM_05747A-00_EN.indd 3
2016-01-20 오후 12:00:17