Table of Contents
Advertisement
4)*
y Select a standard for Water law when operating cooling or heating. Water law is to
y
change the water outlet temperature, considering demand load changes according to
outdoor or indoor temperature.
– According to outdoor temperature
Tcool1
Tcool2
AirCool1
Outdoor temperature
NOTE
• If the unit is not a low temperature water model, the set temperature decided by
the Water law control will not decease below 5 °C.
– According to indoor temperatrue (when using an external temperature sensor)
Tcool1
Tcool2
RoomCool1 RoomCool2
Indoor temperature
NOTE
• If the unit is not a low temperature water model, the set temperature decided by
the Water law control will not decease below 5 °C.
SOL MODULE CONTROLLER_IM_05747A-00_EN.indd 23
AirCool2
[Cooling]
[Cooling]
Theat1
Theat2
AirHeat1
AirHeat2
Outdoor temperature
[Heating]
Theat1
Theat2
RoomHeat1 RoomHeat2
Indoor temperature
[Heating]
English
23
2016-01-20 오후 12:00:22
Advertisement
Table of Contents
