Table of Contents
Advertisement
The detail description of a screen
1.
Shutdown Immediately
Immediate halt of an uninterruptible power supply (UPS) is
performed. After clicking execute, UPS will stop after [UPS
shutdown delay time] that appears at the bottom. The client
shuts down immediately.
2.
Restart UPS
An uninterruptible power supply (UPS) is rebooted. After
clicking execute, UPS will stop after [UPS shutdown delay
time] that appears at the bottom. In addition, UPS will start after
a lapse of [UPS restart delay time]. The client shuts down
immediately. The client shuts down immediately.
3.
Delay Time for UPS Reboot
Time to hold the Off state at the time of reboot is set up.
4.
UPS Shutdown Delay Time
The delay time to an uninterruptible power supply (UPS) stop is
set up after clicking execute. It becomes a common setting of
[UPS management] - [shutdown setting] screen.
5.
Turn On UPS/Cancel UPS Shutdown
The halt condition of an uninterruptible power supply (UPS) is
canceled and started. When power supply Off is manually
carried out from the front panel of an uninterruptible power
supply (UPS), it cannot start by this setup.
6.
Buzzer Test
A buzzer is immediately sounded for about 1 second.
7.
Outlet B/C(control)
The output of the outlet B and C of an uninterruptible power
supply (UPS) is controlled.
8.
UPS cold start function
Set whether to enable the cold start function of uninterruptible
power supply (UPS)
9.
Maximum Backup Time for AC Fail
Backup time of the UPS is set when an abnormality occurs in
the power input of the uninterruptible power supply (UPS)
15
Advertisement
Table of Contents
