Transporting Pannoramic Desk - 3DHISTECH Pannoramic DESK User Manual

Pannoramic DESK 1.15 User's Guide
If the slide is broken, make sure to remove all pieces completely from
the device. The edge of the broken area of the slide is sharp and it can lead
to injury and contagion! Broken slide can be removed only by a well-trained
person!
6. Swing fixing lever (3) back to the right towards the holder.
7. Reattach the cover (see 5.3.1 Removing the protective cover).
8. Connect the power cable of the power supply to the power outlet and switch on the power
supply.
9. Launch control software.

5.3.4 Transporting Pannoramic DESK

The following procedure shows how to transport Pannoramic DESK.
Do not lift or transport Pannoramic DESK by holding its protective
covers!
The base unit does not have carrying handles for transporting. One or
two persons can carry the base unit by holding it by its base plate. You
can find the weight data of the base unit in section 6. Technical Data.
March 13, 2012 - Rev. 1
Warning!
Caution!
Note:
3DHISTECH Ltd.
5 Troubleshooting and Maintenance
69(75)