Routine Work Tab - 3DHISTECH Pannoramic DESK User Manual

Pannoramic DESK 1.15 User's Guide

4.3.1 Routine work tab

The Routine work tab provides the following basic digitization functions:
To insert and remove slides
To move the specimen holder to load/unload position, click
•
the slide when it is in this position.
Ensure that the slide is not tilted, and that it rests perfectly horizontally
on the stage.
To enter the slide name
To enter the slide name manually, type it into the Slide Name field.
•
March 13, 2012
Figure 17 – Routine work tab
Caution!
3DHISTECH Ltd.
4 Software Description
. You can replace
36(75)