Maintenance; Removing The Protective Cover - 3DHISTECH Pannoramic DESK User Manual

Pannoramic DESK 1.15 User's Guide

5.3 Maintenance

This section describes the most common maintenance solutions that can be performed by the user of
the product. For maintenance solutions not described in this manual, contact the service personnel.

5.3.1 Removing the protective cover

To replace the halogen lamp, (or to perform other maintenance work) and to interrupt a running
digitization procedure because of slide jamming, the protective cover of the Pannoramic DESK need
to be removed in order to eliminate the problem.
Before removing the cover, exit the control software, switch off the 24 V power supply and
disconnect the power
Only instructed persons or service technicians can open the device
completely!
March 13, 2012 - Rev. 1
cables.
Caution!
Figure 41 – Removing/reattaching cover
3DHISTECH Ltd.
5 Troubleshooting and Maintenance
65(75)