Affixing Barcode Stickers To Slides - 3DHISTECH Pannoramic DESK User Manual

Pannoramic DESK 1.15 User's Guide
Do not change correction collar settings on 40×/NA objective, if you
need it to be set, contact customer service.

3.1 Affixing Barcode Stickers to Slides

This section describes how to affix barcode stickers to slides. Barcodes enable virtual slide
identification.
The label area is recorded by the preview camera, and can be displayed by the control and viewer
software.
To affix barcode stickers to slides, do the following:
1. Peel off the barcode sticker (2) from the roll.
2. Stick it on the colored label area (1) of the slide, on the specimen side.
Ensure that a marginal space of 1-2 mm remains on all sides between
the sticker and the label area outer limits. It is vital for barcode
identification.
March 13, 2012 – Rev. 1
Warning!
Figure 5 – Slide with a barcode sticker
Note:
3DHISTECH Ltd.
3 Preparing Slides
21(75)