Image Compensation - 3DHISTECH Pannoramic DESK User Manual

Pannoramic DESK 1.15 User's Guide
Barcode Image Compensation
Click Use barcode compensation image to use the previously created compensation image for
scanning the label area. The compensation image improves the effectiveness of barcode reading.
1. Select a slide with a label area covered fully by a white sticker.
2. Take a new compensation image of the blank barcode sticker by clicking

4.2.2 Image Compensation

You can create a new compensation image when there are compensation errors (deriving from the
slide, illumination, staining or embedding medium irregularities) from an empty slide by setting these
options.
By moving the mouse over the
are interested in.
Brightfield panel
Camera Selection
This field displays the active camera. Currently, there is only one active camera for
Brightfield mode.
Objective Selection
The installed objective is selected for creating a new compensation image.
March 13, 2012
buttons, the software displays information about the setting you
Figure 10 – Brightfield Compensation
3DHISTECH Ltd.
4 Software Description
.
29(75)