Inserting And Removing Slides - 3DHISTECH Pannoramic DESK User Manual

Pannoramic DESK 1.15 User's Guide
Do not let barcode sticker protrude from slide edges, or stick on the
coverslip surface (3).
The thickness of the barcode sticker on the slide must not exceed 0.4
mm!
Do not stick more than four barcode stickers over each other and the
overall thickness must must be kept below 1.65 mm (including the
barcodes and the slide).

3.2 Inserting and Removing Slides

Pannoramic DESK features a manual feed for one single slide.
To insert a slide
Incorrect slide insertion may break the glass. Always make sure that
slides are correctly inserted in the tray. The edge of the broken area of
the slide is sharp and its removal can lead to injury and contagion!
Broken slide can be removed only by a well-trained person!
March 13, 2012 – Rev. 1
Caution!
Caution!
Figure 6 – Inserting and removing a slide
3DHISTECH Ltd.
3 Preparing Slides
22(75)