Connecting Your Versicharge Sg To The Versicomm - Siemens VersiComm VC1COMMA Installation And Operation Manual

Cellular
Table of Contents

Advertisement

Once you have clicked on Ping, type "google.com" in the host section, as seen above and click
the Ping button. This will provide data bytes as seen above and show 0% packet loss. If this is
not true, please follow the troubleshooting guide below for more assistance.
Note: The user manual for the IR915L router can be found using the following link:
https://www.inhandnetworks.com/upload/attachment/201707/10/034659/InRouter900_Series_U
ser_Manual_v3.4_July2017.pdf. This document can assist in any setup and/or troubleshooting
needed for the modem.

5.5 Connecting your VersiCharge SG to the VersiComm

Set up the VersiCharge for connection to the VersiComm Wi-Fi network - the installer must first
follow the installation instructions for the EV chargers using the Installation Manual included with
each charger or by following the instructions online:
https://digitalcontentcenter.compas.siemens-
info.com/documents/20181/307701/SIE_IM_VC30GRYU-GRYHW.pdf/6f647dab-9688-439d-
b504-bb773ebd9e90.
When the EV chargers have been installed correctly, follow the instructions in the Quick Setup
Guide to get the EV chargers to communicate with the VersiComm. This document can also be
found at:
https://assets.new.siemens.com/siemens/assets/api/uuid:9724b7ed-865f-46e5-846c-
d8dc93c1caae/version:1567173953/versichargequickinstallguideapp.pdf. After following these
steps, the charging station will begin to connect to the VersiComm Wi-Fi network.
Unrestricted
18
©
2019 Siemens Industry, Inc.
814205 Rev02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Versicomm vc2comma

Table of Contents