Setting Mode; Maximum Weighing Capacity & Division Setting - Jadever JWI-3100 User Manual

CAN DIEN TU TAN HIEP THANH
Step 3: Install the Indicator (4) on the bracket,
with the bracket aligning with the bracket slot
(8) of the indicator.
Step 4: After connecting load cell connector to load cell port, the installation is completed.
Note: Use the knob pole (7) to adjust the inclination angle of indicator and the screw (6) to adjust
direction of the indicator. After adjusting the indicator to an optimal position, lock the screw.

5. Setting Mode

5-1 Maximum Weighing Capacity & Accuracy Setting
1. Press and hold key
300.00 KG 300.00 KG" 300.00 KG 300.00 KG
window displays "
+/PRINT/HI
2. Press
TARE/
or to shift the decimal point and press
Note: if not the needed capacity, long press
to set the capacity casually. Please do as follows.
/G/N
Press
+/PRINT/HI
Press
/G/N
Press
+/PRINT/HI
Press
UNIT/SET
Press
www.tanhiepthanh.com.vn
ZERO/ESC
and
release the key and it enter the capacity setting
,
HOLD/LO/- to choose common used capacity.
or
TARE/
or to shift key leftward or rightward
-/ HOLD/LO
or
TARE/
or until the decimal point is blinking.
-/ HOLD/LO
or
to choose kg, g, lb or
TARE/
while powering on the scale. When the
UNIT
to choose kg, g, lb or
UNIT/SET
until the number leftmost is blinking
to change the value.
to shift the decimal point
台 斤
JWI-3000
/G/N
Press
.
台 斤
6