Jadever JWI-3100 User Manual page 9

Displays the offset value and the keypad testing can be conducted
CAN DIEN TU TAN HIEP THANH
2. brightness choices
1,2,3,4 available for choice. The more the level, the brighter the display
3. power-saving parameters choices
5 1 0 3 0 6 0 O FF available for choices. The scale enters into power-saving mode within
， ， ， ，
5, 10, 30, or 60 seconds (available) under weighing mode. LED displays a small decimal in
point in the power-saving mode.
4. Auto-off
Off N on power off
：
5 1 0 3 0 6 0(minutes) : Auto power off after 5, 10, 30, 60 minutes under the condition that
， ， ， ， ， ， ， ， ， ， ， ，
there is no action and the weight is equal or lower than 9d
5. Unit setting
UNIT/SET
Init : Press key
lb...final .(final=keep the final being used unit when power off )
UNIT/SET
Use: Press key
the unit
UNIT/SET
Note P ress
：
enable / disable the unit
6. Zero range
d0, d1, d2, d3, d4 and d5. (d= scale division)
7. Hold function
HoLd – 0 ： ： ： ： no hold function
Peak hold. Press any key to release
HoLd – 1 ： ： ： ：
HoLd – 2 ： ： ： ： Hold after stable. Press any key to release
Hold after stable. Release after moving away the article
HoLd – 3 ： ： ： ：
HoLd – 4 ： ： ： ： Press key
NOTE: The function works only the weight is above 20d
8. Check weighing memory
www.tanhiepthanh.com.vn
to select the default unit when powering on the scale: kg,
to select the weighing unit. on
to choose the weighing unit. Press
HOLD/LO/-
to hold. Press any key to release
JWI-3000
Enable the unit off
：
/G/N TARE/
or
Disable
：
to
8