Jadever JWI-3100 User Manual page 10

on C heck weighing function is auto-on when restart the indicator
：
CAN DIEN TU TAN HIEP THANH
off C heck weighing function would not auto-on when restart the indicator
：
9. Stable Check Weighing
On: Check weighing after stable indicator appears and the weights is between the upper and
lower limit
Off: Check weighing when the weights is between the upper and lower limit
10. Check Weighing buzzer beep
Hi There will be a warning sound when the weight of articles exceeds the upper limit, and
：
the weight is equal or more than 20d
LO: There will be a warning sound when the weight of articles exceeds the lower limit, and
the weight is equal or more than 20d
OK T here will be a warning sound when the weight of articles is between the upper and
：
lower limit (including the upper and lower limits), and the weight is equal or more than 20d
OUT T here will be a warning sound when the weight of articles is beyond the upper & lower
：
limit, and the weight is equal or more than 20d
no.beep no beep
：
11. External device
CX: MMS screen (V0.02 version)
CK t hermal printer
： ： ： ：
= Birch printer
= Godex printer
= Zebra printer
= Dot matrix printer
=Large LED display
=Computer
12. RS-232 Serial Transmission Rate
9600 4 800 2 400
， ，
13. Print mode
contin C ontinuous print
：
www.tanhiepthanh.com.vn
paper size 57.5mm
（
p aper size 5cm*3cm
（
p aper size 5cm*3cm
（
p aper size 5cm*3cm
（
）
）
）
）
JWI-3000 9