Power Supply; Function Setting - Jadever JWL Series Manual

3. Delete the present accumulation record for the sake of wrong
1. Adds the indicated weight into accumulation memory
2. During editing, save and return to the higher option
1. Memory recall
2. Select the former parameter in the same level
3. Select the former record when checking the accumulation record
4. Shift keys leftwards
1. During setting value, add 1 to the current value
2. Set the upper limit of the check weighing
3. Print
1. During setting value, deduct 1 to the current value
2. Set the lower limit of the check weighing
3. Hold function

4-3 Power supply

Please verify the local AC power source and switch the two-stage switch to the proper place before
plugging into the power outlet.
Alternative power supply
1) AC 110V/220V (AC±10%)
2) (6V/4A) Internal Rechargeable Battery
Power Consumption
About 300 mW without backlight
About 380 mW with backlight
Low Battery Warning
When appears in the upper left corner of the weight window, the battery requires recharging.
The charge lamp turns green from red when the recharging is completed (which takes about 8
hours).Disconnect the scale from power supply when it is fully charged.
5 Function Setting and

Function Setting

5-1
M-/SET
1. Press and hold
to enter function setting. The window displays "check". Setting item "P00" displays
momentarily at the left bottom
/MR
2. Press or
accumulation operation under the accumulation mode.
Description of Parameter Values
while powering on or long press
TARE/
to shift between the functions
(II)
M-/SET
JWL
under normal weighing mode
5