Assembling - Makita DTD152 Technical Information

Drive end of
Armature (30)

3.3.2.2. ASSEMBLING

(30)
Drive end of Armature (30)
(29)
(30)
(29)
Figure 19
Drive end of
Armature (30)
(30)
(29)
Notch of Yoke unit (29)
Figure 20
Figure 21
5. Press the drive end of Armature (30) to a workbench to
separate Armature (30) from Yoke unit (29).
1. Face the notch of Yoke unit (29) to the drive-end side
of Armature (30).
2. While holding Yoke unit (29) on a workbench, insert
Armature (30) into Yoke unit (29) slowly until the drive
end of Armature reaches workbench.
3. When the drive end of Armature (30) reaches a
workbench, lift up Yoke unit (29) slowly.
Note:
- Do not pinch your finger between Armature fan and Yoke
unit (29).
- Insert Armature (30) into Yoke unit (29) carefully so that its
wire is not damaged.
July 2015
12 / 27