Makita DTD152 Technical Information page 13

Drive end of Armature (30)
(28)
(8-28)
Figure 22
(32)
Drive end of Armature (30)
Figure 23
4. Insert the drive end of Armature (30) into Bearing box
complete (28) while engaging the drive end of Armature
(30) with Spur gears in Hammer case section (8-28) to
rotate them smoothly.
5. Assemble Brush holder complete (32) to the drive end of
Armature (30).
Note:
(1) When assembling Brush holder complete (32) to the
drive end of Armature (30), Carbon brush (31) must not
be locked with the pressure of Torsion spring.
Figure 17)
(See
(2) When assembling a new Brush holder complete, see
6. Assembly of Brush holder complete to
July 2015
Armature.
13 / 27