2.
ABOUT THIS MANUAL
The number in the parenthesis () is the item number on the exploded diagram
3.
REPAIR
Repair the machine in accordance with "Instruction manual" or "Safety instructions".
3.1. NECESSARY REPAIRING TOOLS
Code No.
1R003
Retaining ring pliers ST-2N
1R040
Armature holder 50 set for use with Vise
1R045
Gear extractor (large)
1R212-A
Tip for retaining ring pliers
1R212-B
Plate set (with screws)
1R223
Torque wrench shaft 20-90N·m
1R224
Ratchet head 12.7
1R232
Pipe 30
1R288
Screwdriver magnetizer
-
Socket 30-78
-
Socket 32-50
-
Extension bar (Square drive: 12.7 mm)
Description
1).
(Figure
Use for
removing Ring spring 11 (8)
removing / assembling Hammer case complete (13)
disassembling Hammer section (17-25)
use with 1R003 in order to remove/ assemble Ring spring 11 (8)
assembling Hammer case complete (13)
attaching to 1R223, when assembling Hammer case complete (13)
removing Bit sleeve (11)
removing Steel balls
use with 1R223 and Extension bar in order to remove/ assemble
Hammer case section (8-28)
removing/ assembling Hammer case section (8-28)
removing Hammer case section (8-28)
July 2015
5 / 27