Makita DTD152 Technical Information page 10

Figure 12
1R224
Socket 30-78
Figure 13
(13)
Groove
Figure 14
5. Fix Socket 32-50 with two 1R040 and Vise.
6. Set Hammer case section (8-28) to Socket 32-50.
(8-28)
Vise
Socket 32-50
1R040
7. Turn 1R223 counterclockwise.
1R223 Note: The fastening torque must be 45 to 55 N·m. (460 ~
8. Assemble Bumper (12) to Hammer case complete (13)
while aligning each groove.
(12)
560 kgf·cm)
July 2015
10 / 27